Economical filter suited for a range of air sampling applications.
Moisture variations in air or gases during air sampling will not cause chemical reactions on the filter.
Heat-treated (HT) version available for reduction of trace organics.
Fiberfilm 过滤膜
货号
说明
包装
7210
T60A20, 25 mm
100/pkg
7211
T60A20, 37 mm
50/pkg
7212
T60A20, 47 mm
50/pkg
7216
T60A20, 55 mm
50/pkg
7213
T60A20, 70 mm
50/pkg
7209
T60A20-HT, 70 mm
50/pkg
7214
T60A20, 90 mm
50/pkg
7257
T60A20, 100 mm
50/pkg
7215
T60A20, 8 x 10 in.
50/pkg
DescriptionTissuquartz FiltersEmfab Filters*Fiberfilm FiltersFilter MediaPure quartz, no binderBorosilicate glass microfibers reinforced with woven glass cloth and bonded with PTFEHeat resistant borosilicate glass fiber coated with fluorocarbon (TFE)Diameter25 - 142 mm and 8 x 10 in.12 - 142 mm and 8 x 10 in.25 - 100 mm and 8 x 10 in.Typical Thickness432 µm (17 mils)178 µm (7 mils)203 µm (8 mils)Typical Filter Weight5.8 mg/cm25.0 mg/cm23.4 mg/cm2Typical Water Flow Rate0.35 bar (35 kPa, 5 psi)220 mL/min/cm232 mL/min/cm2220 mL/min/cm2Typical Air Flow Rate0.7 bar (70 kPa, 10 psi)73 L/min/cm268 L/min/cm2180 L/min/cm2Maximum Operating Temperature - Air1093 ºC(2000 ºF)260 ºC(500 ºF)315.5 ºC(600 ºF)Typical Aerosol Retention**99.90%99.95%96.40%pH in Boiled Water Extract6.5 - 7.5--
* The TX40HI45 and TX40HI75 are made from the same materials but were developed in conjunction with the U.S. EPA (Method 26) when a need arose to sample the exhaust gases from the stacks at incinerator facilities. These two grades are made with higher levels of the PTFE binder resin than the TX40HI20WW to withstand the corrosive atmosphere. The TX40HI75 has a higher level of binder than the TX40HI45 and both have a higher level than the TX40HI20WW.
Notice: The content above (including the pictures if any)comes from authorized manufacturers or networks. In case of infringement, please contact to delete it. This platform does not provide information storage services.